GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2007 🢒 Vivant 🢒 Suspension 🢒 Front Suspension 🢒 Lower Control Arm Ball Joint Replacement

Disassembly Procedure

    Object Number: 1265571 Size: SH
  1. Remove the control arm. Refer to Control Arm Replacement .
  2. Drill off the heads of the 3 rivets with a 12 mm (0.47 in) drill bit.
  3. Punch out the rivets with a drift.

Assembly Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1255637 Size: SH
  1. Connect the ball joint to the control arm by inserting three ball joint bolts from below the control arm.

    2. Tighten
    Tighten the ball joint-to-control arm nuts to 81 N·m (16 lb ft).

  2. Install the control arm. Refer to Control Arm Replacement .