Removal Procedure
Notice: Refer to Battery Disconnect Caution in the Preface section.
- Disconnect the negative battery cable.
- Remove the front left wheel. Refer to
Tire and Wheel Removal and Installation
.
- Remove the bolts, screws and the front wheel splash shield.
- Disconnect the electrical connector.
- Disconnect the washer hose from the washer pump.
- Remove the washer pump.
Installation Procedure
- Install the washer pump.
- Connect the washer hose to the washer pump.
- Connect the electrical connector.
- Install the front wheel well splash shield.
Notice: Refer to Fastener Notice in the Preface section.
- Install the wheel well splash shield bolts and screws.
Tighten
Tighten the bolts and screws to 2 N·m (18 lb in).
- Install the front left wheel. Refer to
Tire and Wheel Removal and Installation
.
- Connect the negative battery cable.