Notice: Refer to Fastener Notice in the Preface section.
- Install the speedometer-driven gear bolt and the speedometer-driven gear into the transaxle housing.
Tighten
Tighten the speedometer-driven gear bolt to 4 N·m (35 lb in).
- Install the clutch-release bearing guide and the clutch-release bearing.
- Install the backup lamp switch into the transaxle housing.
Tighten
Tighten the backup lamp switch to 20 N·m (15 lb ft).
- Install the differential into the transaxle housing. Refer to
Differential Case Assemble .
- Install the bearing plate, with the shafts attached.
- Install the bearing plate bolts.
Tighten
Tighten the bearing plate bolts to 22 N·m (16 lb ft).
- Install the larger transaxle cover and the transaxle cover bolts.
Tighten
Tighten the transaxle cover bolts to 18 N·m (13 lb ft).
- Install the gearshift lever cover and the gearshift lever cover bolts.
Tighten
Tighten the gearshift lever cover bolts to 22 N·m (16 lb ft).
- Install the transaxle into the vehicle. Refer to
Transmission Replacement .