Tools Required

DT 46470 (DW260-030) Differential Oil Seal Installer

Caution: Refer to Battery Disconnect Caution in the Preface section.




1. Disconnect the negative battery cable.
2. Remove the drive axles.

Important: Do not damage the bore of the transaxle case.

3. Use a screwdriver to remove the transaxle drive seal. If necessary, crush the seal first with the screwdriver in order to loosen the seal from the case.

1. Use the DT 46470 (1) to install the transaxle drive seal .
2. Install the drive axles.
3. Connect the negative battery cable.