Tools Required

DT 46475 (DW260-070) Auto Transaxle Plug Remover/Installer

Notice: Refer to Fastener Notice in the Preface section.




1. Install the oil pan, oil gasket, and the oil pan bolts.

Tighten
Tighten the oil pan bolts to 6 N·m (53 lb in).




2. Install the oil cooler inlet and outlet pipes. Refer to Transmission Fluid Cooler Hose/Pipe Replacement .



3. Use the DT 46475  (1) to install the transaxle fluid drain plug.
4. Install the engine under cover.
5. Refill the transaxle fluid. Refer to Transmission Fluid Level Inspection .
6. Connect the negative battery cable.