Tools Required

Caution: Refer to Safety Glasses Caution in the Preface section.

1. Remove the rear cover. Refer to Transmission Rear Cover Replacement .
2. Remove the 2 sealing rings for Clutch B and E.



3. Take out the input shaft with clutch B/E.



4. Remove the needle bearing and the thrust washer.
5. Remove the shim.



6. Take out the retaining snap ring.



7. Take out piston B.



8. Remove disc set B.



9. Remove the rectangular-section ring for the input shaft and the retaining ring. Remove the piston rings (1, 2).



10. Remove the inner disc carrier E and the needle roller thrust bearing.



11. Remove the snap ring.



12. Remove disc set E.



13. Use the DT 46483  (1) to press down on the cup spring on clutch E.
14. Remove the split stop ring.



15. Remove the oil dam and the cup spring.
16. Remove the O-ring from the oil dam.



17. Use the DT 46482  (1) to press down on the cup spring on clutch B.
18. Remove the split stop ring.



19. Remove the cup spring.