GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

    Caution: Refer to Battery Disconnect Caution in the Preface section.


    Object Number: 1264532  Size: SH
  1. Disconnect the negative battery cable.
  2. Separate the plastic clip from the end of each ball socket.
  3. Separate the ball sockets from the ball studs on the linkage bolts using a pry bar.
  4. Remove the control shift rod from the vehicle.

Installation Procedure


    Object Number: 1264532  Size: SH
  1. Install the control shift rod into the vehicle.
  2. Press the ball sockets onto the ball studs on the linkage bolts.
  3. Connect the plastic clip on the end of each ball socket.
  4. Connect the negative battery cable.