GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2007 🢒 Vivant 🢒 Steering 🢒 Power Steering 🢒 Power Steering Pump Replacement

Removal Procedure

    Object Number: 1265528 Size: SH
  1. Remove the power steering pump drive belt. Refer to Power Steering Pump Belt Replacement
  2. Siphon the power steering fluid from the fluid reservoir.
  3. Disconnect the pressure line pipe from the outlet connection on the power steering pump and the pressure line hose from the inlet connection on the power steering pump.

    4. Object Number: 1265531 Size: SH
  4. Remove the bolt from the front right side of the power steering pump.
  5. Remove the power steering pump assembly mounting bolts.
  6. Remove the power steering pump assembly.

Installation Procedure

    Object Number: 1265531 Size: SH
  1. Install the power steering pump assembly.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the power steering pump assembly mounting bolts.

    3. Tighten
    Tighten the bolts to 25 N·m (18 lb ft).

  3. Install the bolt to the front right side of the power steering pump.

    4. Tighten
    Tighten the bolt to 25 N·m (18 lb ft).


    Object Number: 1265528 Size: SH
  4. Connect the pressure line pipe to the outlet connection on the power steering pump.
  5. Connect the pressure line hose to the inlet connection on the power steering pump.

    6. Tighten
    Tighten the nut to 28 N·m (21 lb ft).

  6. Fill the fluid reservoir with power steering fluid to the MAX level.
  7. Bleed the power steering system. Refer to Power Steering System Bleeding .