GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2007 🢒 Vivant 🢒 Power and Signal Distribution 🢒 Wiring Systems and Power Management 🢒 Ignition and Start Switch Replacement

Removal Procedure

    Object Number: 1265538 Size: SH
  1. Remove the ignition lock cylinder. Refer to Ignition Lock Cylinder Replacement.
  2. Remove the ignition switch retaining screw.
  3. Disconnect the electrical connector from the ignition switch and remove the ignition switch.

Installation Procedure

    Object Number: 1265538 Size: SH
  1. Connect the electrical connector to the ignition switch.
  2. Install the ignition switch with the retaining screw.
  3. Install the ignition lock cylinder. Refer to Ignition Lock Cylinder Replacement.