1

Inspect other instrument lights.

Are those lights also off?

--

Go to Symptoms - Lighting Systems

Go to Step 2

1. Remove the controller.
2. Turn ON the ignition.
3. Measure the voltage between terminal A13 and of the controller and ground

Does the voltage measure within the specified value?

11-14 V

Go to Step 4

Go to Step 3

Repair the wiring harness between splice S206 and terminal A13 of the controller connector or between splice S206 and terminal A14 of the controller connector.

Did you complete the repair?

--

System OK

--

Inspect the illumination bulb.

Is the bulb burned out?

--

Go to Step 5

Go to Step 6

Replace the bulb. Did you complete the repair?

--

System OK

--

Replace the controller.

Did you complete the repair?

--

System OK

--