GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

    Caution: Refer to Battery Disconnect Caution in the Preface section.


    Object Number: 1265738  Size: SH
  1. Disconnect the negative battery cable.
  2. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .
  3. Disconnect the front wheel speed sensor electrical connector.
  4. Remove the bolt and front wheel speed sensor from the steering knuckle.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1265738  Size: SH
  1. Install the bolt and front wheel speed sensor to the steering knuckle.
  2. Tighten
    Tighten the bolt to 9 N·m (80 lb in).

  3. Connect the front wheel speed sensor electrical connector.
  4. Connect the negative battery cable.