For 1990-2009 cars only
Inspection Procedure
- After completing all the necessary procedures on the steering gear, inspect the position of the front wheels and the steering wheel.
- With the vehicle on the floor, place the steering wheel in the straight-ahead position.
- Mark the centerline of the front tires on the floor.
- Turn the steering wheel all the way to the right.
- Mark the centerline of the front tires on the floor.
- Measure the turning angle of each tire.
- Compare the measurement to the specifications.
Specifications
| • | The outside angle (1) is 32 degrees 40 minutes. |
| • | The inside angle (2) is 37 degrees 15 minutes. |
