GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 Vivant 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Ignition Coil Replacement

Removal Procedure

    Caution: Refer to Battery Disconnect Caution in the Preface section.


    Object Number: 1263898 Size: SH
  1. Disconnect the negative battery cable.
  2. Remove the power steering fluid reservoir. Refer to Power Steering Fluid Reservoir Replacement .
  3. Disconnect the electronic ignition (EI) system ignition coil connector.
  4. Note the ignition wire location and remove the ignition wire.
  5. Remove the EI system ignition coil retaining nuts.
  6. Remove the EI system ignition coil.

Installation Procedure

    Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 1263898 Size: SH
  1. Install the EI system ignition coil into the mounting location and install the retaining nuts.

    2. Tighten
    Tighten the EI system ignition coil retaining nuts to 10 N·m (89 lb in).

  2. Connect the EI system ignition coil connector.
  3. Install the power steering fluid reservoir. Refer to Power Steering Fluid Reservoir Replacement .
  4. Connect the negative battery cable.