Step | Action | Values | Yes | No |
|---|---|---|---|---|
1 | Is either of the fuses F3 or F16 open? | -- | Go to Step 2 | Go to Step 3 |
2 |
Did you complete the repair? | -- | System OK | -- |
3 |
Does the voltage measure near the specified? | 11-14 V | Go to Step 5 | Go to Step 4 |
4 | Repair the open power supply circuit for the fuse. Did you complete the repair? | -- | System OK | -- |
5 | Use a voltmeter to measure the battery voltage available at the clock connector terminal 1. Does the voltage measure near the specified? | 11-14 V | Go to Step 7 | Go to Step 6 |
6 | Repair the open circuit between the clock connector terminal 1 and the fuse F3. Did you complete the repair? | -- | System OK | -- |
7 | Turn ON the ignition. Is battery voltage available at the clock connector terminal 5? | -- | Go to Step 9 | Go to Step 8 |
8 | Repair the open circuit between the clock connector terminal 5 and the fuse F16. Did you complete the repair? | -- | System OK | -- |
9 | Measure continuity between the clock connector terminal 2 and ground. Does the resister indicate specified value? | 0 ohms | Go to Step 10 | Go to Step 11 |
10 | Replace the clock. Did you complete the repair? | -- | System OK | -- |
11 | Repair the open ground circuit between the clock connector terminal 2 and the ground G203. Did you complete the repair? | -- | System OK | -- |
