Rear Window Wiper Motor Replacement for Chevrolet Vivant 2008

Caution: Refer to Battery Disconnect Caution in the Preface section.




1. Disconnect the negative battery cable.
2. Remove the rear window wiper arm. Refer to Rear Window Wiper Arm Replacement .
3. Remove the back door trim.
4. Disconnect the electrical connector.
5. Remove the washer hose.
6. Remove the bolts and the rear wiper motor.

1. Install the rear wiper motor.

Notice: Refer to Fastener Notice in the Preface section.

2. Install the bolts.

Tighten
Tighten the bolts to 9 N·m (80 lb in).

3. Install the washer hose.
4. Connect the electrical connector.
5. Install the back door trim.
6. Install the rear window wiper arm. Refer to Rear Window Wiper Arm Replacement .
7. Connect the negative battery cable.