GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 Vivant 🢒 Transmission/Transaxle 🢒 Automatic Transaxle - ZF 4HP 16 🢒 Range Selector Lever Cable Replacement

Removal Procedure

    Caution: Refer to Battery Disconnect Caution in the Preface section.


    Object Number: 1255921 Size: SH
  1. Remove the battery.
  2. Remove the clip from the selector lever connection on the transaxle case.
  3. Disconnect the shift control cable from the selector lever connection.
  4. Remove the clip from the shift control cable at the transaxle mount connection.

    5. Object Number: 1255918 Size: SH
  5. Remove the floor console. Refer to Front Floor Console Replacement .
  6. Loosen the shift control cable adjuster pinch nut.
  7. Loosen the nut from the cable bracket.
  8. Remove the shift control cable from the shift control assembly.

    9. Object Number: 1255920 Size: SH
  9. Remove the shift control cable from the transaxle mount.
  10. Pull the shift control cable, including the rubber grommet, through the cowl of the vehicle.

Installation Procedure

    Object Number: 1255920 Size: SH
  1. Install the shift control cable into the cowl of the vehicle.
  2. Install the shift control cable onto the transaxle mount.

    3. Object Number: 1255918 Size: SH
  3. Install the shift control cable onto the shift control assembly.
  4. Tighten the nut on the cable bracket.

    5. Notice: Refer to Fastener Notice in the Preface section.

  5. Install the shift control cable adjuster pinch nut.

    6. Tighten
    Tighten the nut to 8 N·m (71 lb in).


    Object Number: 1255921 Size: SH
  6. Install the clip to the shift control cable at the transaxle mount connection.
  7. Install the clip to the select lever connection on the transaxle case.
  8. Adjust the shift control cable. Refer to Range Selector Lever Cable Adjustment .
  9. Install the battery.