Removal Procedure
Notice: Refer to Battery Disconnect Caution in the Preface section.
- Disconnect the negative battery cable from the battery.
- Remove the right windshield pillar.
- Disconnect the wiring connectors (3).
- Remove the nuts and the transaxle control module (TCM).
Installation Procedure
Notice: Refer to Fastener Notice in the Preface section.
- Install the TCM and the nuts.
Tighten
Tighten the TCM mounting nuts to 23 N·m (17 lb ft).
- Connect the wiring connectors.
- Connect the right hand windshield pillar.