Seat Belt Replacement - Center Rear Three-Point

1. Fold the rear seat cushion and seat back.
2. Remove the bolts, washers, and the seat belt buckles.



3. Remove the rear seat belt bolt from the roof.
4. Remove the center seat belt retractor from the quarter trim panel.

1. Install the center seat belt retractor to the quarter trim panel.

Notice: Refer to Fastener Notice in the Preface section.

2. Install the rear seat belt bolt to the roof.

Tighten
Tighten the bolt to 38 N·m (28 lb ft).




3. Install the bolts, washers, and the seat belt buckles.

Tighten
Tighten the bolt to 38 N·m (28 lb ft).

4. Fold the rear seat up.

Seat Belt Replacement - Center Rear Two-Point

1. Fold the rear center seat down.
2. Open the seat cover to reveal the seat belt buckle.
3. Remove the bolts, washer, and the seat belt buckle.

Notice: Refer to Fastener Notice in the Preface section.




1. Install the bolts, washer, and the seat belt buckle.

Tighten
Tighten the bolt to 38 N·m (28 lb ft).

2. Close the seat cover to cover the seat belt buckle.
3. Fold the rear center seat up.