GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 Vivant 🢒 Power and Signal Distribution 🢒 Data Communications 🢒 Remote Control Door Lock Receiver Replacement

Removal Procedure

    Caution: Refer to Battery Disconnect Caution in the Preface section.


    Object Number: 1282121 Size: SH
  1. Disconnect the negative battery cable.
  2. Remove the driver knee bolster.
  3. Disconnect the remote control door lock receiver electrical connector.
  4. Remove the screw.
  5. Slide the remote control door lock receiver toward the rear of the vehicle and remove it.

Installation Procedure

    Object Number: 1282121 Size: SH
  1. Install the remote control door lock receiver.
  2. Install the screw.
  3. Connect the remote control door lock receiver electrical connector.
  4. Install the driver knee bolster.
  5. Connect the negative battery cable.