GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2008 🢒 Vivant 🢒 HVAC 🢒 Heating, Ventilation, and Air Conditioning 🢒 Air Conditioning (A/C) Refrigerant Pressure Sensor Replacement

Removal Procedure

    Caution: Refer to Battery Disconnect Caution in the Preface section.


    Object Number: 1279847 Size: SH
  1. Disconnect the negative battery cable.
  2. Recover the refrigerant. Refer to Refrigerant Recovery and Recharging .
  3. Remove the air cleaner hose clamp.
  4. Remove the 3 bolts that secure the air cleaner housing and remove the air cleaner housing.

    5. Object Number: 1279848 Size: SH
  5. Disconnect the pressure sensor connector.
  6. Remove the pressure sensor connector.

Installation Procedure

    Object Number: 1279848 Size: SH
  1. Install a new O-ring seal on the pressure sensor.
  2. Install the pressure sensor.

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Connect the pressure sensor connector.

    4. Tighten
    Tighten the pressure sensor to 7 N·m (62 lb in).


    Object Number: 1279847 Size: SH
  4. Install the air cleaner housing and bolts.
  5. Install the air cleaner hose clamp.
  6. Evacuate and recharge the A/C system. Refer to Refrigerant Recovery and Recharging .
  7. Connect the negative battery cable.