Engine Front Cover and Oil Pump Installation for Daewoo G2X 2008
- Install two new friction washers.
- Install the engine front cover with a new gasket.
Notice: Refer to Fastener Notice in the Preface section.
Important: The center bolt (1) should be tightened last.
- Install the engine front cover bolts.
Tighten
Tighten the engine front cover bolts to 25 N·m (18 lb ft).
- Install the long water pump bolt.
Tighten
Tighten the water pump bolt to 25 N·m (18 lb ft).
- Install the accessory drive belt tensioner.
- Install the accessory drive belt tensioner bolt.
Tighten
Tighten the bolt to 45 N·m (33 lb ft).