Transmission Control Lever Knob Replacement for Daewoo G2X 2008

1

Shift Indicator

Procedure

1. Grasp the edge of the shift indicator bezel by reaching under the bezel from the soft boot area. Lift the shift indicator bezel up to release the bezel from the instrument panel cluster trim plate.
2. Disconnect the shift indicator electrical connector.

2

Shift Control Range Select Lever Clip

Tip
Do not reuse the clip.

3

Shift Control Knob Retaining Screw

Notice: Refer to Fastener Notice in the Preface section.

Tip
Loosen the screw 3 turns. It is not necessary to fully remove the screw in order to remove the shift control knob from the shift control lever.

Tighten
2.5 N·m (22 lb in)

4

Shift Control Knob