Preliminary Procedures

1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection.
2. Remove the intake manifold. Refer to Intake Manifold Replacement.

1

Starter Solenoid Terminal Nut

Caution: Refer to Fastener Caution in the Preface section.

Tighten
10 N·m (89 lb in)

2

Positive Battery Cable Terminal

3

Starter Solenoid "S" Terminal Nut

Tighten
3 N·m (27 lb in)

4

Engine Harness Terminal

5

Engine Harness Terminal

6

Starter Motor Bolt (Qty: 2)

Tighten
40 N·m (30 lb ft)

7

Starter Bolt