Preliminary Procedure

Open the hood in order to access the front marker lamp screw.

1

Front Side Marker Lamp Screw

Caution: Refer to Fastener Caution in the Preface section.

Tighten
2 N·m (18 lb in)

2

Front Side Marker Lamp Assembly

Procedure

1. Remove the screw.
2. Disconnect the electrical connector from the forward lamp harness.
3. Slightly lift the retention clip upward on the lamp assembly.
4. Slide the lamp forward from under the bracket assembly.
5. Remove the lamp and electrical harness as one assembly.