GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Daewoo 🢒 2009 🢒 G2X 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Output Speed Sensor Replacement

Removal Procedure
  1. Remove the transmission fluid pan and filter. Refer to Automatic Transmission Fluid and Filter Replacement.

    2. Object Number: 795914 Size: SH
  2. Disconnect the electrical wiring harness connector (3) from the output speed sensor (2).

    3. Object Number: 812728 Size: SH
  3. Remove the output speed sensor bolt (3).
  4. Remove the output speed sensor (2).
  5. Remove the output speed sensor spacer (1).
  6. Inspect the output speed sensor (2) for the following conditions:
    7. • Damaged or missing magnet
    • Damaged housing
    • Bent or missing electrical terminals

Installation Procedure

    Object Number: 812728 Size: SH
  1. Install the output speed sensor spacer (1).
  2. Install the output speed sensor (2).

    3. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the output speed sensor bolt (3) and tighten to 11 N·m (97 lb in).

    4. Object Number: 795914 Size: SH
  4. Connect the electrical wiring harness connector (3) to the output speed sensor (2).
  5. Install the transmission fluid pan and filter. Refer to Automatic Transmission Fluid and Filter Replacement.