GM Service Manual Online
For 1990-2009 cars only

Object Number: 1588689  Size: MF

Callout

Component Name

Preliminary Procedure

Raise the vehicle. Refer to Lifting and Jacking the Vehicle.

1

Stabilizer Shaft Insulator Mounting Bolt (Qty: 4)

Caution: Refer to Fastener Caution in the Preface section.

Tip

    • The mounting bolts DO NOT have to be removed to perform this procedure. Loosen the bolts until the bracket is loose enough to slide the insulator along the stabilizer shaft.
    • Support the lower control arm with a jack stand in order to ease the removal and installation of the link.

Tighten
55 N·m (41 lb ft)

2

Stabilizer Shaft Bracket

3

Stabilizer Shaft Insulator

Tip
Before removing the insulator, clean the area around the insulator and apply a small amount of silicone spray.