For 1990-2009 cars only
Removal Procedure
- Remove the rear differential. Refer to Differential Replacement.
- Remove the 9 carrier cover bolts (6).
- Using the pry tabs (4, 5, 7), remove the carrier cover (3) from the differential carrier (1).
- Remove the O-ring seal (2) from the cover (3).
Installation Procedure
- Install the housing cover O-ring (2) into the groove on the housing cover (3).
- Apply a light coat of oil to the housing cover O-ring (2) and install the housing cover (3) onto the housing (1).
- Install the 9 side cover bolts (4) and tighten in a criss-cross pattern to 29 N·m (21 lb ft).
- Install the rear differential. Refer to Differential Replacement.
Caution: Refer to Fastener Caution in the Preface section.
