GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Daewoo 🢒 2009 🢒 G2X 🢒 Transmission 🢒 Automatic Transmission - 5L40-E/5L50-E 🢒 Automatic Transmission Fluid Pressure Test Hole Plug Replacement

Removal Procedure
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
  2. Remove the front closeout panel. Refer to Floor Panel Tunnel Panel Replacement - Front.

    3. Object Number: 792887 Size: SH
  3. Remove and discard the oil pressure test plug.

Installation Procedure

    Caution: Refer to Fastener Caution in the Preface section.


    Object Number: 792887 Size: SH
  1. Install a NEW oil pressure test plug and tighten to 11 N·m (97 lb in).
  2. Check the transmission fluid level (fill if necessary). Refer to Transmission Fluid Check.
  3. Install the front closeout panel. Refer to Floor Panel Tunnel Panel Replacement - Front.
  4. Lower the vehicle.