GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Daewoo 🢒 2009 🢒 G2X 🢒 Steering 🢒 Power Steering 🢒 Intermediate Steering Shaft Replacement

Object Number: 1645413 Size: MF

Callout

Component Name

Caution: Secure the steering wheel utilizing a strap to prevent rotation. Locking of the steering column will prevent damage and a possible malfunction of the SIR system. The steering wheel must be secured in position before disconnecting the following components:

   • The steering column
   • The intermediate shaft
   • The steering gear
After disconnecting these components, do not move the front tires and wheels. Failure to follow these procedures may cause improper alignment of some components during installation and result in possible damage to the SIR coil.

Preliminary Procedures

  1. Remove the left front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement.
  2. Remove the driver knee bolster bracket. Refer to Driver Knee Bolster Bracket Replacement.

1

Intermediate Steering Shaft Bolt

Caution: Refer to Fastener Caution in the Preface section.

Tip
Discard the bolt.

Tighten
58 N·m (43 lb ft)

2

Intermediate Steering Shaft Lower Bolt

Tip
Discard the bolt.

Tighten
58 N·m (43 lb ft)

3

Intermediate Steering Shaft Seal

Tip
Make sure the seal is seated properly when installing.

4

Intermediate Steering Shaft