Exhaust Temperature Sensor Replacement - Position 2 for Daewoo Lacetti (Global Delta) 2009

Warning: Refer to Exhaust Service Warning in the Preface section.

Warning: Refer to Protective Goggles and Glove Warning in the Preface section.

1. Remove the exhaust flex pipe. Refer to Exhaust Flexible Pipe Replacement.



2. Disconnect the exhaust temperature sensor wiring harness plug (2).
3. Unclip the exhaust temperature sensor wiring harness plug (3) from the particulate filter bracket (1).
4. Remove the exhaust temperature sensor - position 2 (4).

Caution: Refer to Fastener Caution in the Preface section.




1. Install the exhaust temperature sensor - position 2 (4) and tighten to  45 N·m (34 lb ft).
2. Clip in the exhaust temperature sensor wiring harness plug (3) to the particulate filter bracket (1).
3. Connect the the exhaust temperature sensor wiring harness plug (2).
4. Install the the exhaust flex pipe. Refer to Exhaust Flexible Pipe Replacement.