Transmission Rear Mount Bracket Replacement for Daewoo Lacetti (Global Delta) 2009

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Using a suitable jack stand, support the rear of the powertrain.



3. Remove the transmission bracket mount to mount through bolt (1).



4. Remove the transmission mount to transmission bolts (1).
5. Remove the transmission mount bracket.

1. Install the transmission mount.

Caution: Refer to Fastener Caution in the Preface section.

2. Install the transmission mount to transmission bolts (1) and tighten to  100 N·m (74 lb ft).



3. Install the transmission bracket mount to mount through bolt (1) and tighten to  100 N·m (74 lb ft).
4. Remove the jack stand.
5. Lower the vehicle.