GM Service Manual Online
For 1990-2009 cars only
Makes
›
Daewoo
›
2008
›
W200
›
Engine
›
Engine Electrical
› Starter Solenoid Clicks, Engine Does Not Crank
Search
Starter Solenoid Clicks, Engine Does Not Crank for Daewoo W200 2008
Electrical Information Reference
•
Circuit Testing
•
Testing for Intermittent Conditions and Poor Connections
•
Wiring Repairs
•
Battery Inspection/Test
•
Diagnostic System Check - Vehicle
Preform the
Diagnostic System Check - Vehicle
.
Preform the battery inspection/test
Battery Inspection/Test
.
Connect a DMM to the battery record reading.
Connect a DMM set to volts between the positive battery cable (1) at starter motor and a known ground (2).
⇒
If voltage varies more than 1 volt from the battery voltage check circuit for open/high resistance.
Connect a DMM set to volts between the starter motor solenoid supply cable (1) and a known ground (2)
Turn key to start position. If voltage varies more than 1 volt from the battery voltage check circuit for open/high resistance.
If the voltage is within range replace starter motor.
Repair Instructions
Starter Motor Replacement
.