Air Inlet Valve Actuator Replacement for Daewoo W200 2008

Air Inlet Valve Actuator Replacement LHD

1. Remove the air inlet assembly. Refer to Air Inlet Assembly Replacement .



2. Disconnect the electrical connector (1) from the recirculation actuator.



3. Remove the recirculation actuator to air inlet assembly retaining screws (1).
4. Remove the recirculation actuator.

1. Install the recirculation actuator.

Notice: Refer to Fastener Notice in the Preface section.

2. Install the air inlet assembly retaining screws (1) to the recirculation actuator.

Tighten
Tighten the screws to 1 N·m (9 lb in).




3. Connect the electrical connector (1) to the recirculation actuator.
4. Install the air inlet assembly. Refer to Air Inlet Assembly Replacement .