Removal Procedure
- Remove the fuel tank module. Refer to
Fuel Tank Module Replacement
.
- Push down on the fuel level sensor electrical connector tab (1), disengaging the retainer, and disconnect the electrical connector.
- Remove the fuel level sensor wiring from under the module clip (2).
- Push in the fuel level sensor tabs (1) disengaging the sensor clips from the module bucket.
- Slide the fuel level sensor up out from the module bucket.
Installation Procedure
- Position the fuel level sensor to the module bucket and slide the sensor down.
- Ensure that the fuel level sensor tabs (1) engage the module bucket.
- Install the fuel level sensor wiring under the module clip (2).
- Connect the fuel level sensor electrical connector (1) to the module cover.
- Install the fuel tank module. Refer to
Fuel Tank Module Replacement
.