GM Service Manual Online
For 1990-2009 cars only

Object Number: 1862193  Size: MF

Callout

Component Name

Preliminary Procedures

  1. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement .
  2. Remove the manifold absolute pressure (MAP) sensor. Refer to Manifold Absolute Pressure Sensor Replacement .
  3. Remove the positive crankcase ventilation (PCV) hose. Refer to Positive Crankcase Ventilation Tube Replacement - Front .
  4. Remove the brake booster hose from the intake manifold.

1

Front Insulator

Procedure

Lift upward on the front intake manifold insulator.

2

Purge Tube Assembly

Procedure

Disconnect the purge tube assembly from the evaporative emission (EVAP) canister connector.

3

Right Side Intake Manifold Insulator Bolt (Qty: 3)

Notice: Refer to Fastener Notice in the Preface section.

Procedure

Remove the right side intake manifold insulator bolts.

Tighten
10 N·m (89 lb in)

4

Right Side Intake Manifold Insulator

Procedure

Remove the left side insulator retaining bolts.

Tighten
10 N·m (89 lb in)

5

Left Side Insulator Bolt (Qty: 2)

6

Left Side Insulator

Procedure

Remove the left side insulator.