Preliminary Procedure

Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement .

1

Headlamp Screw (Qty: 4)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
6 N·m (53 lb in)

2

Fender Brace Screw to Headlamp

Tighten
2 N·m (18 lb in)

3

Headlamp Horizontal and Vertical Adjustment Nut (Qty: 2)

Procedure

1. Set the cam adjusting nuts to the nominal setting of 6 turns off fully seated prior to installing the new assembly.
2. Check the front bumper fascia to headlamp finish fit and adjust the cam nuts accordingly to achieve an even fit.

4

Headlamp Vertical Adjusting Bolt Bushing

5

Headlamp Assembly

Procedure

1. Gently pull forward the headlamp assembly.
2. Disconnect the forward lamp harness from the headlamp assembly electrical connector.
3. Remove the headlamp from vehicle.