Diagnostic Instructions
| • | Perform the Diagnostic System Check - Vehicle prior to using this diagnostic procedure. |
| • | Review Strategy Based Diagnosis for an overview of the diagnostic approach. |
| • | Diagnostic Procedure Instructions provides an overview of each diagnostic category. |
DTC Descriptor
DTC B1019: System Configuration ErrorCircuit/System Description
When calibrating the liftgate position, the power liftgate control module (PLGM) is placed in a functional state to learn the liftgate travel limits. DTC B1019 will set automatically as an indicator that the system is in learn mode and not as a fault indicator. Once the travel limits are learned by the PLGM, the PLGM will exit calibration mode and DTC B1019 will go to history. If the PLGM does not exit learn mode, DTC B1019 will remain current and indicate a fault.
Conditions for Running the DTC
System voltage to the liftgate control module must be 9-16 volts.
Conditions for Setting the DTC
Whenever the liftgate control module is replaced or reprogrammed.
Conditions for Clearing the DTC
| • | The DTC will be current until the liftgate calibration procedure has been completed. |
| • | When the calibration procedure has been completed the DTC will be a history status code. |
| • | A history DTC will clear after 50 ignition cycles or with a scan tool using the clear DTCs function. |
Diagnostic Aids
A new or reprogrammed control module will be in a locked state and will require an ignition cycle before the calibration procedure can be performed.
Reference Information
Schematic Reference
Connector End View Reference
Vehicle Access Connector End Views
Description and Operation
Rear Hatch/Gate Description and Operation
Electrical Information Reference
Scan Tool Reference
Circuit/System Testing
Perform the Liftgate Calibration Procedure. The liftgate module should learn the travel limits, exit the calibration mode, and B1019 should go to history.
| ⇒ | If the liftgate module does not exit learn mode after the calibration attempt, replace the liftgate module. |
Repair Instructions
Perform the Diagnostic Repair Verification after completing the diagnostic procedure.
