Notice: Refer to Exterior Trim Emblem Removal Notice in the Preface section.

Preliminary Procedures

1. Using a 50/50 mixture of isopropyl alcohol and clean drinkable water and a clean towel, remove the leftover adhesive residue from the flare.
2. Wipe the fender with a clean dry towel.
3. Peel the adhesive tape backing from the fender flare.
4. Secure the fender flare starting at the center and working outward.
5. Completely wet out the fender flare.

1

Integral Tab (Qty: 9)

2

Integral Clip (Qty: 2)

3

Front Fender Flare Assembly