Front Side Door Molding Replacement. GMC Truck Acadia

For 1990-2009 cars only

Makes 🢒 GMC_Truck 🢒 2007 🢒 Acadia - 2WD 🢒 Body Hardware and Trim 🢒 Exterior Trim 🢒 Front Side Door Molding Replacement

Callout	Component Name
1	Front Side Door Center Molding Assembly Notice: Refer to Exterior Trim Emblem Removal Notice in the Preface section. Procedures Using a J 25070 Heat Gun remove the front side door molding. Peel the adhesive tape liner from the molding. Align the 3 plastic retainers to the holes in the door. Secure the retainers to the door. Using a clean towel and hand pressure, wet out the entire length of the molding starting at the front edge of the rear door and working rearward. Special Tools J 25070 Heat Gun
2	Front Side Door Center Molding Retainer (Qty: 3)

Callout

Component Name

Front Side Door Center Molding Assembly

Notice: Refer to Exterior Trim Emblem Removal Notice in the Preface section.

Using a J 25070 Heat Gun remove the front side door molding.
Peel the adhesive tape liner from the molding.
Align the 3 plastic retainers to the holes in the door.
Secure the retainers to the door.
Using a clean towel and hand pressure, wet out the entire length of the molding starting at the front edge of the rear door and working rearward.

J 25070 Heat Gun

Front Side Door Center Molding Retainer (Qty: 3)