Callout
| Component Name
|
Caution: Following the deployment of a side impact air bag, inspect the following
parts for damage. Replace these parts if necessary:
ā¢ | The seat cushion frame |
ā¢ | The seat recliner, if equipped |
Failure to do so may cause future personal injury.
Preliminary Procedure
- Disable the SIR system. Refer to
SIR Disabling and Enabling.
- Remove the seat back cushion cover and pad. Refer to
Front Seat Back Cushion Cover and Cushion Pad Replacement.
|
1
| Side Impact Inflatable Restraint Nut (Qty: 2)
Notice: Refer to Fastener Notice in the Preface section.
Tighten 5 NĀ·m (44 lb in) |
2
| Inflatable Restraint Module Assembly
Procedure
- Unclip the side impact module wiring harness from under the seat.
- Disconnect the electrical connector.
- Fully deploy the module before disposal. If the module was replaced under warranty, fully deploy and dispose of the module after the required retention period. Refer to
Inflator Module Handling and Scrapping.
- When replacing the inflatable restraint module, ensure the wire is secured inboard of the recline mechanism by utilizing the seat trim hook.
|