Removal Procedure
Caution: Refer to Battery Disconnect Caution in the Preface section.
- Remove the floor matt from between the front and middle row passenger seat, if equipped.
- Record all of the customers radio station presets.
- Turn OFF all the lamps and accessories.
- Ensure the ignition switch is in the OFF position and the key is removed.
- From inside the vehicle, remove the battery cover screw and cover.
- Loosen the negative battery cable terminal (1) nut.
- Remove the negative battery cable from the battery negative terminal (2).
- Reposition the negative battery cable away from the battery negative terminal.
Installation Procedure
- Position and install the negative battery cable to the battery negative terminal (2).
Notice: Refer to Fastener Notice in the Preface section.
- Tighten the negative battery cable terminal (1) nut.
Tighten
Tighten the nut to 9 N·m (80 lb in).
- Install the battery cover and screw.
Tighten
Tighten the screw to 1.6 N·m (14 lb in).
- Reset all of the customers radio station presets.
- Install the middle row floor matt, if equipped.