Callout
| Component Name
|
Preliminary ProcedureRemove the passenger side power door lock and window switch. Refer to
Door Lock and Side Window Switch Replacement - Passenger Side
.
|
1
| Front Side Door Pull Handle Cover
Tip Install the top portion of the pull handle cover first to ensure tabs are lined up and push the cover in firmly. |
2
| Front Side Door Inside Handle Bezel Finish Cover
|
3
| Front Side Door Trim Panel Bolt (Qty: 3)
Notice: Refer to Fastener Notice in the Preface section.
Tighten 6 N·m (18 lb in) |
4
| Front Side Door Locking Rod Knob Assembly
Procedure
- Ensure the locking rod is in the unlocked position.
- Use a flat-bladed tool to disengage the detent tab and then remove the knob by pulling upward.
- When re-installing, push the knob down until the detent tab touches the locking rod opening cover.
- Push the detent tab into the lock knob to locking rod.
|
5
| Front Side Door Trim Panel Assembly
Procedure
- Use a door trim pad removal tool, or equivalent, at each of the 9 retainer locations to aid in the removal of the trim panel.
- Disengage the door lock cable.
- Disconnect the electrical connector.
|
6
| Front Side Door Trim Panel Retainer (Qty: 9)
|