The player can be used for CD, MP3, DVD audio, and as a DVD video player.
With this feature, movies/pictures do not appear on the navigation screen, unless the vehicle is in P (Park). It operates on the Rear Seat Entertainment (RSE) screen while the vehicle is moving. The RSE video screen starts play of the DVD when a DVD is inserted into the navigation system. The DVD player can be controlled by the buttons on the navigation system, the Rear Seat Audio (RSA) system, and the remote control. The DVD player can also be used for the rear seat passengers with the radio off. The rear seat passengers can power on the video screen and use the remote control to navigate the disc. See "Rear Seat Entertainment System" in the Index of your vehicle's owner manual for more information.
The DVD player is only compatible with DVDs of the appropriate region code that is printed on the jacket of most DVDs.
The DVD slot is compatible with most audio CDs, CD-R, CD-RW, DVD-Video, DVD-Audio, DVD+R/RW single layer media along with MP3 and WMA formats. DVD-R, DVD-RW, and DVD+R dual layer media is not supported.
If playing any compatible DVD+R(W) the sound quality may be reduced due to disc quality, the method of recording, the quality of the video that has been recorded, and the way the disc has been handled. There may be an increase in skipping, difficulty in finding chapters, and/or difficulty in loading and ejecting. If these problems occur, check the bottom surface of the DVD. If the surface of the DVD is damaged, such as cracked, broken, or scratched, the DVD does not play properly.
If there is no apparent damage, try a known good DVD.
Notice: The DVD player can only accept and play, one CD or DVD.
If a label is added to a DVD, more than one DVD is inserted into the slot, or an attempt to play scratched or damaged DVDs is made, the DVD player could be damaged. The DVD player slot should be kept free of foreign materials, liquids, and debris.Do not add any label to a DVD, it could get caught in the DVD player. If a DVD is recorded on a personal computer and a description label is needed, try labeling the top of the recorded DVD with a soft marker.
If an error displays, see "DVD Messages" later in this section.
If the vehicle has a Rear Seat Entertainment (RSE) system, it has a radio capable of playing both CD and DVD discs. See "Rear Seat Entertainment" in the Index of the vehicle's owner manual.
The CD/DVD player is the top slot on the radio faceplate. The player is capable of reading the DTS programmed DVD-Audio or DVD-Video media. DTS and DTS 2.0 are trademarks of Digital Theater Systems, Inc. AC-3 is Dolby Digital Surround technology.
The system is optimized to use 5.1 audio surround sound before stereo tracks. Stereo modes are typically available if manually selected. Press the Options button, then the Audio button or DVD main or top menu.
There are three ways to play a DVD:
• | Once a DVD is inserted, the system automatically starts play of the DVD up to the DVD top menu. The (play) button must be pressed to start the movie from the DVD's menu screen. |
• | If you are on a map screen, select the DVD screen button. |
• | Press the AUDIO hard key, then select the DVD screen button. |
• | The (play) button must be pressed for the movie to resume play when the vehicle has been turned OFF and then back ON. |
When a DVD is loaded, the rear seat passengers can power on the RSE video screen and use the remote control to navigate through the DVD.
(Power/Volume):
Once a DVD starts to play, the menu options and cursor screen buttons automatically appear. To display the menu Options screen button while a DVD is playing, touch anywhere on the screen.
Options: Select this screen button to view the menu option screen buttons. Menu options are available when they are highlighted. Some menu options are only available when the DVD is not playing./ (Pause/Play):
(Stop):
(Rewind):
(Forward):
Audio:
Angle:
Search:
SEEK (Previous Track/Chapter):
(Tuning Knob):
When using fade in 5.1 Surround mode, the left front and right front speakers will fade rearward, leaving the center front speaker unaffected until the last fade step, then all front speakers mute.
If the Rear Seat Audio (RSA) is turned on, the radio disables fade and mutes the rear speakers.
When fading full rearward, a stereo mode rather than surround can be selected. Stereo mode allows full audio content, center channel, voices, etc., to be faded rearward for rear occupants using vehicle speakers.
The following methods allow for switching surround sound into a 2 channel stereo mode:
• | Select a stereo or 2 channel mode using the DVD-Video top menu. Most commercial DVD-Video top menus contain audio configuration settings. |
• | While the movie is playing, select OPTIONS to show all available DVD options. Select the AUDIO buttons to change current DVD audio track. |
Some DVD-Video discs only contain Dolby Digital 5.1 (AC-3) or DTS 5.1 audio tracks and may not allow conversions into stereo modes.
See "Adjusting the Speakers" under Navigation Audio System for more information.
If Disc Read Error appears on the display and/or the DVD comes out, it could be for one of the following reasons:
• | A disc was inserted with an invalid or unknown format. |
• | The disc is not from a correct region. |
• | The map DVD disc was installed into the DVD audio/video slot. See "Installing the Map DVD" under Maps . |
• | It is very hot. When the temperature returns to normal, the DVD should play. |
• | The vehicle is being driven on a very rough road. When the road becomes smoother, the DVD should play. |
• | The DVD is dirty, scratched, wet, or upside down. |
• | The air is very humid. If so, wait about an hour and try again. |
• | There may have been a problem while burning the DVD. |
• | The label may be caught in the DVD player. |
If the DVD is not playing correctly, for any other reason, try a known good DVD.
If any error occurs repeatedly or if an error cannot be corrected, contact your dealer/retailer.