Rocker Panel Rear Molding Replacement. GMC Truck Acadia

For 1990-2009 cars only

Makes 🢒 GMC_Truck 🢒 2008 🢒 Acadia - 2WD 🢒 Body Hardware and Trim 🢒 Exterior Trim 🢒 Rocker Panel Rear Molding Replacement

Rocker Panel Rear Molding Replacement Acadia

Callout	Component Name
Preliminary Procedure Open the rear door in order to remove the rocker panel rear molding.
1	Rear Rocker Panel Finish Panel Screw (Qty: 3) Notice: Refer to Fastener Notice in the Preface section. Tighten 1.5 N·m (13 lb in)
2	Rocker Panel Molding Retainers (Qty: 2)
3	Rocker Panel Rear Molding Assembly Procedure Release the 2 retainers from the back side of the molding and remove.

Callout	Component Name
Preliminary Procedure Open the rear door in order to remove the rocker panel rear molding.
1	Rear Rocker Panel Finish Panel Screw (Qty: 3) Notice: Refer to Fastener Notice in the Preface section. Tighten 1.5 N·m (13 lb in)
2	Rocker Panel Rear Molding Assembly Tip Release the 2 retainers from the back side of the molding and remove.

Callout

Component Name

Open the rear door in order to remove the rocker panel rear molding.

Rear Rocker Panel Finish Panel Screw (Qty: 3)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
1.5 N·m (13 lb in)

Rocker Panel Rear Molding Assembly

Tip
Release the 2 retainers from the back side of the molding and remove.