Preliminary Procedures

1. Remove the front compartment sight shields. Refer to Front Compartment Sight Shields Replacement .
2. Remove the front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement .

1

Front Fascia Screw (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tip
Reach underneath the wheelhouse to access the bolts.

Tighten
2 N·m (18 lb in)

2

Front Fascia Retainer (Qty: 6)

3

Front Fascia Bracket Screw (Qty: 2)

Tighten
2 N·m (18 lb in)

4

Front Fascia

Procedure

1. Drill out the license plate bracket rivets, if equipped.
2. Disconnect any electrical connectors.
3. Transfer parts as needed.
4. Pull forward to remove the front bumper fascia.