REAR BRAKE WHEEL CYLINDER ROTATION SUP.'B'

IN THE EVENT THAT A BACKING PLATE AND WHEEL CYLINDER ARE REQUIRED FOR VEHICLES INVOLVED IN THIS RECALL, THE FOLLOWING PART NOS. SHOULD BE USED:

78-80 MONTE CARLO, MALIBU, EL CAMINO ASSEMBLY LH 18013045 LEMANS, GRAND PRIX, CUTLASS BACKING PLATE RH 18013046 CENTRUY, REGAL, GMC CABALLERO & WHEEL CYL. RETAINING KIT 18013604

1982 S TRUCK ASSEMBLY LH 18013047 BACKING PLATE RH 18013048 & WHEEL CYL. RETAINER KIT 18013604

CLAIM INFORMATION IS NOW AS FOLLOWS:

REPAIR CODE DESCRIPTION TIME ALLOWANCE

2A INSTALL BRACKET RETAINER KIT .5

3A INSTALL BRACKET RETAINER KIT 1.2 REPLACE ONE BACKING PLATE AND WHEEL CYLINDER ASSEMBLY.

4A INSTALL BRACKET RETAINER KIT 1.6 REPLACE TWO BACKING PLATES AND WHEEL CYLINDER ASSEMBLIES

AN AMOUNT OF $14.00 WILL BE INCLUDED IN 3A AND $15.50 IN 4A TO ALLOW FOR DIFFERENTIAL OIL, GASKET, AXLE SEALS AND BRAKE FLUID. THE USUAL .1 FOR ADMINISTRATION IS ALSO INCLUDED. PARTS CREDIT WILL BE DEALER NET + 30%.

NORMAL MAINTENANCE ITEMS SUCH AS WORN BRAKE LININGS AND PARKING BRAKE CABLES FOUND DURING THE CAMPAIGN THAT REQUIRE REPLACEMENT WILL BE AT THE CUSTOMER'S EXPENSE. CUSTOMER MUST BE CONTACTED AND THEIR CONSENT OBTAINED PRIOR TO REPLACEMENT OF PARTS NOT COVERED BY THE CAMPAIGN.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.