The driver information center (DIC) consists of a double line 14 character display placed in the lower center area of the instrument panel cluster (IPC). The DIC will display vehicle information, configuration, and warning parameters to the driver.

The display parameters are cycled, changed, and acknowledged using a control stem. Pressing the stem for 1 second will display the DIC options. Pressing the stem for more than 2 seconds will select an option.

The driver information center (DIC) parameters are displayed by order of priority as follows (from highest to lowest):

Vehicle Information

Vehicle information provides feedback to the driver on vehicle performance, mileage, maintenance, or related information.

Vehicle information can only be displayed with the engine OFF and the ignition in the ON position.

When the English/Metric status changes, any applicable vehicle information data values will also change.

DIC Trip Information/Reset Capabilities

The available DIC Trip Information and reset capabilities are as follows:

Odometer

The odometer is capable of displaying values from 0-999,999 KM or MI. If the ignition is in the OFF or UNLOCK/ACC position, the odometer can be displayed by pressing the trip/reset switch. The odometer will remain displayed for 5 seconds.

Trip Odometers

The trip odometer is capable of displaying values from 0-9999.9 KM or MI.

When the maximum value is reached, the trip odometer will roll over to 0.0.

Holding the control stem for greater than 4 seconds while the trip odometer is displayed will reset the displayed trip odometer to 0.0 upon release of the stem. The trip odometer will remain displayed after being reset .

Engine Oil Life

The engine oil life message is based on the class 2 message to the instrument panel cluster (IPC). The oil life message is displayed when the engine oil has to be changed as determined by the powertrain control module (PCM).

Pressing the control stem for longer than 2 seconds while the message is displayed on the DIC will clear the message. An audible warning will sound confirming that the system has been reset.

Display appears as OIL LIFE.

The driver information center (DIC) is capable of displaying messages in more than one language. The DIC language selection procedure is as follows:

1. With the engine OFF, turn the key to ON, but do not start the engine.
2. Close all doors so the DOORS message does not display in the DIC.
3. Momentarily press and release the trip reset stem until the current language is displayed: English, French or Spanish.
4. To select a different language, press and hold the trip reset stem until the next language appears.
5. Repeat Step 4 until the desired language is displayed. Once the desired language is shown on the DIC display, the language is set.
6. To exit language selection, momentarily press and release the trip stem. All DIC messages will now display in the language selected.

Refer to Personalization Description and Operation .

Driver Warnings

For the list of Driver Warnings, refer to Indicator/Warning Message Description and Operation .