For 1990-2009 cars only
- Disconnect the cruise control release switch electrical connector (1).
- Rotate the cruise release switch counterclockwise, allowing the retainer to release.
- Pull the brake pedal rearward to full stop.
- While holding the brake pedal in position rearward, push the switch inward fully until the switch body contacts the brake pedal arm.
- Rotate the switch clockwise until a "click" is heard.
- Connect the cruise control release switch electrical connector (1).
- The switch is properly adjusted when there is 7 mm (0.28 in) clearance between the end of the barrel and the striker plate.
At this point the plunger in the switch should be pushed in.
