GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2008 🢒 Canyon Pickup - 2WD 🢒 General Information 🢒 General Information 🢒 Rear Bumper Replacement

Removal Procedure
  1. Disconnect the license plate lamp harness.
  2. Remove the step pads, if necessary.
  3. Disconnect the trailering harness, if necessary.
  4. Remove the bumper bracket to frame bolts.

    5. Object Number: 1313596 Size: SH
  5. Remove the bumper.
  6. Remove the bracket to bumper bolts.

Installation Procedure

    Object Number: 1313596 Size: SH
  1. Hand start all the bolts.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the bumper bracket to bumper bolts, non-hitch option only.

    3. Tighten

        • Tighten the bracket to top bumper bolts to 40 N·m (30 lb ft).
        • Tighten the bracket to bottom bumper bolts to 100 N·m (74 lb ft).
  3. Install the bumper.

    4. Tighten

        • Tighten the bumper to frame lower bolts to 100 N·m (74 lb ft).
        • Tighten the bumper to frame cross bolts to 160 N·m (118 lb ft).
  4. Install the bumper shell to reinforcement.

    5. Tighten
    Tighten the bumper to frame lower bolts to 40 N·m (30 lb ft).

  5. Install the corner braces to bracket and shell.

    6. Tighten
    Tighten the bumper to frame lower bolts to 15 N·m (11 lb ft).