GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2009 🢒 Canyon Pickup - 2WD 🢒 Engine 🢒 Engine Mechanical - 2.9L 🢒 Engine Lift Bracket Replacement

Removal Procedure

    Object Number: 1350738 Size: SH
  1. Remove the drive belt. Refer to Drive Belt Replacement.
  2. Remove the bolt (3) securing the A/C compressor hose/pipe bracket (2) to the engine lift bracket (1).
  3. Carefully disengage the engine wiring harness conduit (4) from the engine lift bracket (1).

    4. Object Number: 1313647 Size: SH
  4. Remove the 3 generator bolts.

    5. Object Number: 858182 Size: SH
  5. Remove the bolts securing engine lift bracket to the engine.
  6. Remove the engine lift bracket from the engine.

Installation Procedure

    Object Number: 954203 Size: SH
  1. Position the engine lift bracket to the engine.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the bolts securing engine lift bracket to the engine.
    3. • Tighten the bolts in sequence to 5 N·m (44 lb in).
    • Tighten the bolts in sequence to 50 N·m (37 lb ft).
  3. Position the generator to the engine.

    4. Object Number: 1313647 Size: SH
  4. Install the generator bolts and tighten in sequence to 50 N·m (37 lb ft).

    5. Object Number: 1350738 Size: SH
  5. Engage the engine wiring harness conduit (4) to the engine lift bracket (1).
  6. Install the bolt (3) securing the A/C compressor hose/pipe bracket (2) to the engine lift bracket (1).

    7. Tighten the bolt to 9 N·m (80 lb in).

  7. Install the drive belt. Refer to Drive Belt Replacement.